Multi-function labeling machine which is what you have not met?

Looked at the one posted a good label packaging items, in addition to multi-functional packaging machine works magic, the multi-function labeling machine in dealing with the standard, but also very fresh. Together with the Maite Weida multi-function labeling machine to see how the multi-purpose labeling machine how to deal with broken
1. edge
Self-adhesive labels in the die-cut into finished products, the general will stay at the end of the paper than the label width, this is done in order to mark the customer is conducive to revealing. In the process of transporting and handling labels, it is easy to crack the bottom edge of the label. Automatic labeling machine in the labeling when there is a certain tension, the end of the paper edge of the mouth of the label is easy to pull under the action of the tension caused by sticking tape. In addition, there is also an automatic labeling machine on the roller adjustment is not appropriate lead to roll fracturing label edge of the end of the paper caused by paste the situation. Generally by the roller pressure at the end of the paper caused by the paste with the end of the gap at the end of the paper is more regular.
2. Tightly made
If the finished label is too tight, it will cause the glue in the adhesive to be extruded, causing the glue to stick to the back of the base paper so that the whole roll label is not easy to release. This is particularly evident in the summer. If the label is relatively narrow paper on the unit area of the tensile strength will not be too much. Automatic labeling machine in the labeling process is a certain tension. When a roll of glue is used to do the automatic labeling of the label, the labeling process is likely to appear to peel off the label of the end of the label in the tension and tension from the body under the action of the tension was pulled off Resulting in labeling. This situation caused by the labeling tape, because it is pulled pull off the end of the paper at the end of the law, but the fracture surface is relatively homogeneous.
3. Die bad
The quality of the die-cutting quality is also very important for the automatic labeling when it is easy to break the tape. If the die-cutting pressure is too large, the end of the paper is cut and the tensile strength of the base paper is reduced. The die breakage caused by the poor die-cutting is relatively homogeneous, and the gap is in the die-cutting position.
4. destroyed
If the release layer of the backing paper (usually a silicone oil layer) is damaged, it will also cause the label to be broken. This situation caused by the labeling of the tape, the bottom of the fracture surface is jagged. The reason for the failure of the release layer is the defects in the production of the raw material, and the scratching of the release layer may be caused by improper handling in the printing process.
This is the multi-function labeling machine in dealing with the method of cutting edge, multi-function labeling machine style, you can see: http: //www.tjsolidpacking.com/